Fri, Nov 03, 2017 @ 02:00 PM - 03:30 PM
Ming Hsieh Department of Electrical and Computer Engineering
Conferences, Lectures, & Seminars
Speaker: Dr. Ana Claudia Arias, University of California, Berkeley
Talk Title: Printed Flexible Wearable Medical Devices
Abstract: Wearable noninvasive medical sensing is extremely promising for monitoring human performance during physically demanding tasks. Printed sensors provide a distinct advantage over rigid sensors at establishing high-fidelity sensor-skin interfaces due to their inherently flexible material systems and form factors. Hence, these sensors are suitable for monitoring vital signs as well as analytes in bodily fluids. We have demonstrated an integrated wearable and flexible multi-sensor platform capable of simultaneous bioelectronic and biophotonic sensing of physiological state of the human body. The sensor platform is
composed of printed photoplethysmography (PPG) and sweat sensors. The PPG sensor uses blade coated red and near-infrared (NIR) organic light-emitting diodes (OLEDs) and an organic photodiode (OPD) to optically measure heart rate and blood oxygenation. The sweat sensor is comprised of printed sodium, ammonium and lactate sensors. The lactate sensor exhibits high sensitivity of 26 uA/mM cm2 with the linear detection range of 1-20 mM of lactate. The sodium and ammonium sensors exhibit near-Nernstian response with sensitivities of 60.0 +/- 4.0 mV (detection range: 1-100 mM) and 56.1 +/- 2.2mV (detection range: 0.1-100 mM) per decade of concentrations, respectively. The sensors are interfaced with a Bluetooth System on Chip for wirelessly reading out sensor data. The complete system is powered by two flexible printed batteries at 8 V and are of 40 mAh capacity. This integrated platform can provide meaningful data to the end-users or healthcare professionals stretching the application domain of wearable sensing beyond the fitness domain to medical diagnostics.
Biography: Dr. Ana Claudia Arias is a Professor at the Electrical Engineering and Computer Sciences Department at the University of California in Berkeley and a faculty director at the Berkeley Wireless Research Center (BWRC) and SWARM lab. Prior to joining the University of California she was the head of the Printed Electronic Devices Area and a Member of Research Staff at PARC, a Xerox Company, Palo Alto, CA. She went to PARC from Plastic Logic in Cambridge, UK where she led the semiconductor group. She received her PhD on semiconducting polymer blends for photovoltaic devices from the Physics Department at the University of Cambridge, UK. Prior to that, she received her master and bachelor degrees in Physics from the Federal University of Paraná in Curitiba, Brazil. Her research focuses on devices based on solution processed materials and applications development for flexible sensors and electronic systems. Ana Claudia is the chair of ThinFilm Electronics Technical Advisory Council and she is an author of over 100 peer reviewed publications and issued patents.
More Info: minghsiehee.usc.edu/about/lectures/munushian
Audiences: Everyone Is Invited
Contact: Marilyn Poplawski